Table of Contents
Advertisement
dCS 905 User Manual
dCS Ltd
4. Display
4. Display
Menu
Menu
4. Display
4. Display
Menu
Menu
4. Display
4.1 Brightness
Menu
Settings
01 .... 10 .... 15
4.1 Brightness Settings
4.1 Brightness Settings
4.1 Brightness Settings
4.1 Brightness Settings
4.2 Display Timeout
4.2 Display Timeout
4.2 Display Timeout
4.2 Display Timeout
4.3 Lock Front Panel
4.3 Lock Front Panel
4.3 Lock Front Panel
4.3 Lock Front Panel
4.4 Display Language
4.4 Display Language
4.4 Display Language
4.4 Display Language
4.5 Display Off
4.5 Display Off
4.5 Display Off
4.5 Display Off
4.6 Function Shortcuts
4.6 Function Shortcuts
4.6 Function Shortcuts
4.6 Function Shortcuts
do this:
do this:
do this:
Manual filename: dCS905 Manual v1.0x Eng.doc
English version
4.2 Display
Timeout
15 Seconds
30 Seconds
1 Minute
3 Minutes
No Timeout
Figure 8 – Display menu
Sets the display brightness. Choose any setting from
this menu is open to set the default brightness (10).
Sets the time delay before the menu closes automatically and the display
changes back to the normal display (status or meter display). The options are:
15
Seconds,
30
Seconds,
option disables the automatic timeout – use the
normal display.
Protects the front panel control settings from unauthorised changes. Normally
set to Unlocked. When set to
"Locked! Hold Cancel to
Sets the language of text appearing on the display.
Use the
F1
and
F3
English. Press
OK
to accept the choice. In this release, only English is
available.
Display
Normally set to
a timeout period. Operating any control turns the display back on briefly.
Defines the function of the
Navigate to this menu and choose
Press
F1
or
F3
to scroll through the options or press
When you reach the option you want, press the
*
be marked
.
Function 2
You can set up
The options are:
4.3 Lock Front
4.4 Display
Panel
Language
Unlocked
English
Locked
1
Minute,
3 Minutes
Locked
and a control is pressed, the warning
Unlock" appears at the bottom of the display.
buttons to scroll through the choices or
On. When set to
Display
F1
,
F2
and
F3
Function
1.
Function 3
and
to different options as you like.
Page 22
Manual for Software Issue 1.0x
November 2006
4.5 Display Off
Display On
Display Off
01
to 15. Press
No
Timeout. The last
or
Cancel
button to return to the
F2
to default to
Off, the display turns off after
buttons.
to reset to None.
F2
OK
button to accept it – it will
email: more@dcsltd.co.uk
web-site: www.dcsltd.co.uk
4.6 Function
Shortcuts
Function 1
Function 2
Function 3
F2
while
Advertisement
Chapters
Table of Contents
