Using A Dcs 905 To Output Dsd - DCS 905 User Manual

dCS 905 User Manual
dCS Ltd
T A
YPICAL PPLICATIONS

Using a dCS 905 to output DSD

dCS 905
CH1(L) CH2(R)
PUSH PUSH
Analogue
CH1
CH2
Analogue source
Manual filename: dCS905 Manual v1.0x Eng.doc
English version
Reference In Reference Out
CH1(L)
PUSH
Sensitivity
CH2(R)
Digital I/O
Figure 1 – DSD output configuration
2.1 Sync Source
Ensure the
menu is set to Off.
The 905 features 3 DSD formats:
P3D
DSD4
SDIF
AES1 AES2 AES3 AES4
menu is set to
1.1 Output Mode
Set the
the output from AES 1-3. This allows 2 channels of DSD
data to be packed into 6 tracks of 24 bit / 44.1kS/s data.
AES 4 carries the same data in 16 bit / 44.1kS/s PCM
format for metering.
1.1 Output Mode
Set the
output from AES 1-4. This allows 2 channels of DSD data
to be packed into 8 tracks of 16 bit / 44.1kS/s data.
1.1 Output Mode
Set the
(P3D)
and take the output from the
2.3 DSD Format
the menu to either
required.
Page 10
Manual for Software Issue 1.0x
November 2006
CH1
CH2
WCLK
~
In
CH1 CH2
SDIF / DSD
Remote
Loop
In Out
Out
75R
Clk
AES 4
AES 3
AES 2
AES 1
Internal 1.3 DDC Mode
and the
DSD (P3D)
menu to
DSD
menu to and take the
DSD
menu to either
SDIF interface. Set
SDIF-2
or
email: more@dcsltd.co.uk
web-site: www.dcsltd.co.uk
SDIF
DSD
out
Disconnect mains
before removing cover
Mains fuse T 500mA
DSD4 or
P3D out
and take
DSD
or
SDIF-3
as