Table of Contents
Advertisement
Cleaning and care
Clean the surfaces of the main
dispenser with a damp cloth.
If the milk pipe connecting pieces are
blocked, clean them under running
water with the brush supplied:
Insert the brush into the pipe
connecting piece. Move it back and
forth until all milk residue has been
removed.
If you have released the connecting
piece from the milk pipe: when
reassembling, ensure that the smaller,
thinner end of the connecting piece is
pushed into the hose.
74
Reassembling the main dispenser
The dispensing unit is easier to
reassemble if the individual parts are
dampened with water beforehand.
Reassemble the dispensing unit.
Push the dispensing spouts firmly
back onto the dispensing unit.
Make sure that all parts are tightly
connected to one another.
Push the dispensing unit back into
the main dispenser and replace the
stainless steel cover.
Tap OK.
Tip: If the coffee machine is switched
off, the main dispenser components
can be removed and cleaned at any
time.
Removing and cleaning the
cup sensor
The cup sensor is located under the
main dispenser.
Clean the cup sensor daily by hand with
warm water and a little liquid dish soap.
Press the two catches together (see
arrows).
Advertisement
Table of Contents
