Table of Contents
Advertisement
Slide the dispensing unit into the
coffee machine.
Connect the milk pipework.
Reinstall the stainless steel cover.
Close the appliance door.
Fit cover to main dispenser
display.
Confirm with OK.
Cleaning the cup rim sensor
Clean the cup rim sensor at least once
a week and more often if heavily soiled.
The cup rim sensor is located under the
central spout.
Press the two catches together (see
arrows).
appears in the
Cleaning and care
The cup rim sensor is released.
Clean the cup rim sensor by hand
with a mild solution of warm water
and liquid dish soap.
Tip: To give the cup rim sensor an extra
thorough clean, clean it in the
dishwasher from time to time.
To reinstall the cup rim sensor, press
it into the holder on the central spout
from below.
Cleaning the milk flask with lid
The milk flask should be taken apart
and cleaned every day after use.
Both the lid and the glass flask can be
cleaned in the dishwasher, or by hand
using a mild solution of warm water and
liquid dish soap.
Remove and empty the milk flask.
Rinse the milk pipework in the lid
under running water and then place
the milk flask lid in the dishwasher.
If no water runs out of the connecting
piece , clean it with the cleaning
brush.
Clean the glass flask.
59
Advertisement
Table of Contents
