Cleaning The Cup Rim Sensor; Cleaning The Milk Container With Lid - Miele CVA 7840 Operating And Installation Instructions

Cleaning and care
 Connect the milk pipework.
 Refit the stainless steel cover.
 Close the appliance door.
Fit cover to central spout
display.
 Confirm with OK.

Cleaning the cup rim sensor

Clean the cup rim sensor at least once
a week and more often if heavily soiled.
The cup rim sensor is located under the
central spout.
 Press the two latches together (see
arrows).
The cup rim sensor is released.
 Clean the cup rim sensor by hand
with warm water and a little washing-
up liquid.
Tip: To give the cup rim sensor an extra
thorough clean, clean it in the
dishwasher from time to time.
 To refit the cup rim sensor, press it
into the holder on the central spout
from below.
68
will appear in the
Cleaning the milk container
with lid
The milk container should be taken
apart and cleaned every day after use.
Both the lid and the glass flask can be
cleaned in the dishwasher, or by hand
using warm water and a little washing-
up liquid.
 Remove and empty the milk
container.
 Rinse the milk pipework in the lid
under running water and then place
the milk container lid in the
dishwasher.
 If no water runs out of the connecting
piece , clean it with the cleaning
brush.
 Clean the glass flask.
 Use a clean cloth to dry all parts,
paying particular attention to the
threads on the lid and on the glass.
 Reassemble the milk container.