Table of Contents
Advertisement
10.2.9
Recommended lubricants
The released and recommended lubricants are listed in the table NT 7300
support.industry.siemens.com/cs/ww/en/view/109753864).
Used lubricants only have conditional approval
The used lubricants are not or only conditionally approved for use in the foodstuff or
pharmaceutical industry.
Use only lubricants with USDA (United States Department of Agriculture) H1 / H2 approval for
deployment in the foodstuff or pharmaceutical industry.
NOTICE
Incorrect operating temperatures impair lubricity of the gearbox oil
Operating temperatures outside the permitted range impair the lubricating property of the
gearbox oil.
Carefully comply with the permissible oil sump temperatures listed in the lubricant table.
The oil used must be approved for use in the ambient temperature range given on the rating
plate.
When changing the oil, comply with the operating temperature range of the new oil as
specified by the oil manufacturer.
Note
As standard, the lubricants and shaft seals are harmonized and coordinated with one another
corresponding to the prevailing operating conditions.
Contact Technical Support for:
• Change of the operating conditions
• Change in oil grade
• Deployment of new shaft seals.
Note
The lubricants used are not at all or only conditionally biodegradable. If biologically degradable
lubricants are required, use only gearbox lubricants with the appropriate classification listed in
the NT 7300 table.
Note
SIEMENS recommends the use of CLP ISO PG oils for gearboxes of sizes 169 and 189 with a
service factor f
Note
These recommendations are not a guarantee of the lubricant quality provided by your supplier.
All lubricant manufacturers are responsible for the quality of their own products.
SIMOGEAR electric monorail gearbox
Operating Instructions, 01/2024, A5E53220855A/RS-AA
DANGER
<1.2.
B
Service and maintenance
10.2 Checking and changing lubricants
(https://
63
Advertisement
Table of Contents
