Table of Contents
Advertisement
Specific safety instructions
3.3 Specific hazard types and fundamental obligations
Poisonous vapors when working with solvents
Avoid breathing vapors when working with solvents.
Ensure adequate ventilation.
Risk of explosion when working with solvents
Ensure adequate ventilation.
Do not smoke.
The company operating the unit must ensure that all persons assigned to work on the geared
motor have read and understood these operating instructions and that they comply with
them in all points in order to:
• Eliminate the risk to life and limb of users and others
• Ensure the operational safety of the geared motor.
• Avoid disruptions and environmental damage through incorrect use.
Comply with the following safety instructions:
In addition to the specified personal protection gear, also wear suitable protective gloves and
safety glasses.
Comply with the instructions on the rating plates attached to the geared motor. The rating
plates must be kept free from paint and dirt at all times. Replace any missing rating plates.
Collect and dispose of used oil in accordance with regulations. Immediately remove any spilt
oil with an oil-binding agent.
Do not use high-pressure cleaning equipment or sharp-edged tools to clean the geared motor.
The machine OEM who installs the geared motors in a plant must include the regulations
contained in these operating instructions in its own operating instructions.
During operation, comply with the vibration levels according to ISO 20816‑1. Maximum
permissible vibration values can be found in Installation notes (Page 26).
28
WARNING
WARNING
SIMOGEAR electric monorail gearbox
Operating Instructions, 01/2024, A5E53220855A/RS-AA
Advertisement
Table of Contents
