Removing the Sacrificial Anode
Remove and discard screw and anode.
smr2016-037-003_a
219100893-030-001_a
Installing the Sacrificial Anode
Installation is the reverse of the removal proce-
dure.
TIGHTENING TORQUE
Sacrificial anode screw
IDF ARM
Removing the iDF Arm
1. Remove the venturi from the pump housing.
2. Remove the water outlet tubes and the iDF arm
from the top of the jet pump housing.
219100963-019
Section 06 STEERING AND PROPULSION
8 N•m ± 1 N•m
(71 lbf•in ± 9 lbf•in)
Subsection 03 (JET PUMP)
219100963-019-200
3. Rotate the iDF arm then using a screwdriver or
any suitable tool, carefully pry out the iDF arm
from the rotary valve.
219100963-019-201
Installing the iDF Arm
The installation is the reverse of the removal pro-
cedure.
VENTURI
Removing the Venturi
1. Remove the iBR gate, VTS trim ring and nozzle.
Refer to
iBR, REVERSE AND VTS
2. Remove the venturi from the jet pump housing.
Installing the Venturi
The installation is the reverse of the removal pro-
cedure.
TIGHTENING TORQUE
Venturi retaining screw
JET PUMP HOUSING
Removing the Jet Pump Housing
1. Remove the iBR gate, VTS trim ring and nozzle.
iBR, REVERSE AND VTS
Refer to
2. Remove the venturi.
subsection.
25 N•m ± 1 N•m
(18 lbf•ft ± 1 lbf•ft)
subsection.
187