Table of Contents
Advertisement
Building in the appliance
Remove the spacers from the cab-
inet front.
The position of the lower cabinet front
aligns with the position of the upper
cabinet front.
When fitting cabinet fronts, consider the
dimensions of the upper cabinet front.
To fit the cabinet front to the lower ap-
pliance door, repeat the steps starting
from "Preparing to fit the cabinet
front".
Measure the gap Y between the ad-
justing bar for the lower appliance
door and the upper appliance door.
Maintain a gap of 1/8" (3 mm) to the
upper cabinet front.
46
Mounting the retaining brackets
The retaining brackets are used to addi-
tionally secure the cabinet fronts to the
bottom of the appliance door.
Do not mount the retaining brackets
until the appliance (or side-by-side
combination, if applicable) has been
installed and the cabinet fronts have
been aligned.
Open the appliance door as far as it
will go.
Slide the top and bottom retaining
brackets from both sides onto the
screw at the bottom of the appliance
door.
Advertisement
Table of Contents
