Mounting The Cabinetry Doors - Miele KFN 9755 iDE Operating And Installation Instructions

^ Snap off the excess from the lower
cover e. It is no longer needed.
^ Fit the bracket cover g onto the
lower mounting bracket c.
^ Close the appliance doors.

Mounting the cabinetry doors

^ Adjust the space between the
appliance door and the mounting rail
to 5/16" (8 mm) a.
^ Slide the mounting aids b to the
height of the cabinetry door: The
lower limiting edge X of the mounting
aids must be at the same height as
the upper edge of the cabinetry door
to be mounted, symbol -.
^ Unscrew the nuts c and remove the
mounting rail d along with the
mounting aids.
Installing the appliance
^ With a pencil, draw a thin line on the
center of the inside of the cabinetry
door.
^ Use the mounting aids to hang the
mounting rail d on the inside of the
cabinetry door. Align the mounting
rail in the middle.
^ Screw on the mounting rail with at
least 6 short particle-board screws e
3/16" x 9/16" (4 x 14 mm). (For
cassette doors, use only 4 screws at
the edge).
^ Carefully pull the mounting aids up
and out f.
^ Turn the mounting aids and
completely insert them (for
safekeeping) into the middle slits of
the mounting rail g.
55