Table of Contents
Advertisement
Place the assembled cover into
the gap above the appliance so it
clicks into place. While doing so,
slide both parts of the cover together
as required.
Mounting the cover in a side-by-side
combination
Insert the joining peg (from the side-
by-side kit) halfway into the channel
in the cover for the left-hand appli-
ance.
Place the second cover onto the pin
and press the two covers together.
Click the two covers together into the
niche above the appliance.
Building in the appliance
On both the upper and lower appli-
ance doors, mount the plastic cov-
ers to the sides of the appliance
door by clicking them into the gap
between the appliance door and the
cabinet door, starting at the bottom
and working up to the top.
49
Advertisement
Table of Contents
