Miele KF2811SF Operating And Installation Instructions page 73

Fridge-freezer combination
Hide thumbs Also See for KF2811SF:
Table of Contents

Advertisement

 Touch the  sensor control to return
to the previous menu level.
- Adjusting the intensity
You can also adjust the intensity of the
function. The lower the in-
Push2Open
tensity, the less force required when
pushing against the door.
 In settings mode , use the  and 
arrow buttons to select
and select OK to confirm your selec-
tion.
 In settings mode , use the  and 
arrow buttons to select
select OK to confirm your selection.
 Use the  and  arrow buttons to
select the desired intensity (
,
) and touch OK to con-
Medium
High
firm your selection.
- Adjusting the duration of the Auto-
Close function
You can also adjust the duration for
how long the appliance door will remain
open until it closes automatically.
 In settings mode , use the  and 
arrow buttons to select
and select OK to confirm your selec-
tion.
 In settings mode , use the  and 
arrow buttons to select
select OK to confirm your selection.
 Use the  and  sensor controls to
select the duration (5 to 30 seconds)
and touch OK to confirm your selec-
tion.
Selecting additional settings
Door Assistant
and
Intensity
Low
,
Door Assistant
AutoClose
and
To protect against inadvertent open-
ing: if you do not pull the appliance
open, it will close again by itself after a
duration defined by you (see "Set Au-
toClose duration").
Pull2Open
 In settings mode , use the  and 
arrow buttons to select 
and select OK to confirm your selec-
tion.
 Use the  and  arrow buttons to
select 
Mode
and touch OK to confirm
your selection.
 Use the  and  arrow buttons to
select 
Pull2Open
confirm your selection.
 Touch the  sensor control to return
to the previous menu level.
– Adjusting the intensity
You can also adjust the intensity of the
 function. The lower the inten-
Pull2Open
sity, the less force is required when
pulling the door.
 In settings mode , use the  and 
arrow buttons to select 
and select OK to confirm your selec-
tion.
 In settings mode , use the  and 
arrow buttons to select 
select OK to confirm your selection.
 Use the  and  arrow buttons to
select the desired intensity (
Medium
,
High
) and touch OK to con-
firm your selection.
Door Assistant
and touch OK to
Door Assistant
Intensity
and
,
Low
73

Advertisement

Table of Contents
loading

Table of Contents