18.5.2
CU-NZ50YKE
Caution! When handling electronic controller, be careful of electrostatic discharge.
1
Remove the 5 screws of the Top Panel.
2
Remove the 8 screws of the Front Panel.
3
Remove the screw of the Terminal Board Cover.
4
Remove the Top Cover of the Electronic
Controller by 4 hooks.
Fig. 1
Fig. 2
Fig. 3
5
Remove 2 screws for the plate of Terminal Board
Cover.
6
Remove the Control Board.
7.
Remove the 4 screws of the Electronic Controller.
150
Fig. 4
Fig. 5
Fig. 6