Setting The Clock And Date; Basic Operation; Switching Off The Volume Temporarily; Illumination Brightness - Philips AJ300D Owner's Manual

BASIC OPERATION.

Switching on the system
• Press POWER.
™ The system will switch to the last selected source.
• Press TUNER/AUX or DOCK.
™ The system will switch to the selected source.
Switching the system to standby mode
• In any source mode, press POWER.

Switching off the volume temporarily

Press MUTE on the remote control to stop sound play-back instantly.
™ Playback will continue without sound and the display shows MUTE .
• To start sound playback you can:
– press MUTE again;
– adjust the volume controls;
– change source.

Illumination brightness

Press REPEAT ALARM /
• The brightness of the display can be adjusted:
➟
Bright Low

SETTING THE CLOCK AND DATE

1. In any mode, press and hold TIME SET until clock digits flashes.
2. Press 2; to select 12 Hours/ 24 Hours mode.
3. Hold down or press ¡1 / 2™ repeatedly to set and adjust the hours.
4. Press TIME SET to confirm.
™ The clock digits for the minutes flash.
5. Repeat the steps 3 - 4 until you complete all the other settings for minutes,
year, month and days.
BRIGHTNESS CONTROL
➟ ➟
Off Bright .
once or more.