Power Supply; Setting The Clock And Date - Philips AJ260 User Manual

Power supply

Power supply
IMPORTANT!
• T
HE SYSTEM IS EQUIPPED WITH A
V S
OLTAGE ELECTOR
VOLTAGE SELECTOR
LOCAL POWER LINE
Make sure you remove the plug from the set
and wall outlet before inserting batteries.
Batteries (not supplied) for the main
unit and the outdoor sensor
1 Open the battery door and insert 4 batteries,
typed AAA for the main unit, and 2 batteries
typed AA for the sensor, with the correct
polarity as indicated by the "+" and "–" sym-
bols inside the compartment.
2 Replace the battery door, making sure the
batteries are firmly and correctly in place.The
set is now ready to operate.
Batteries contain chemical substances, so
they should be disposed of properly.
Mains Adapter.
Note: Remove the batteries before
you use the AC adapter.
1 Connect the mains adapter to the set's DC
7.5V socket and to the power socket.
Helpful hints:
To avoid damage to the set, use only the
adapter supplied!
The type plate is located on the bottom
of the set.
,
SET THE
TO MATCH THE
.

Setting the clock and date

(see 2)
The clock uses 24-hour time format.
Manual setting
You may also set or adjust time manually.
1 Press and hold TIME SET for 2 seconds.
➜ The digits for year flash.
2 Hold down or press TUNING +/- repeat-
edly to adjust the time digits.
• When it comes to adjust month and day, you
may press AUTO SCAN/DATE to change
the display order between month and day.
3 Press TIME SET to confirm the setting.
➜ The digits for month flashes.
4 Repeat steps 2-3 to complete all the other
settings for month, day, hour and minute.
Standby power consumption
(clock mode).........................................................1.5W
Clock and Date