Setting The Clock - Philips AJ 3130 Manual

SETTING THE CLOCK

QUARTZ CLOCK
(/11/14 versions only. See typeplate inside the battery
compartment.)
The clock contains a quartz crystal and runs independent of the
power supply frequency to ensure maximum accuracy.
CLOCK DISPLAY
The time is displayed using the 24-hour clock system.
Important! When setting the clock or alarm time, for accurate
hour and minute adjustment always make sure you press the
HR and MIN keys separately and not simultaneously.
1. Adjust the clock control to SET TIME.
2. Press and hold down the H
the hours and minutes respectively:
• With your finger held down on H
digit from 0 to 23.
• With your finger held down on M
as a digit from 00 to 59.
3. Release the H or M key when you have reached the
R IN
correct time.
4. To safeguard the clock time from being accidentally
adjusted, turn the clock control to CLOCK.
or M key to set and adjust
R IN
, the hour increases as a
R
, the minutes increases
IN
RADIO
You can use the clock radio solely as a radio.
1. Adjust the RADIO switch to
2. Select your waveband using the BAND switch.
3. Use TUNING to find your radio station.
4. Adjust the sound with the VOLUME control.
5. To turn off the radio, adjust RADIO to
To improve radio reception:
• For FM, extend and position the pigtail to obtain optimum
reception.
• For MW, the set is provided with a built-in aerial which to
function best should be placed on a non-metallic surface
e.g. wood, plastic. Direct the MW aerial by adjusting the
position of your clock radio.
RADIO
.
ON
.
OFF
7