Radio; Setting The Clock & Alarm - Philips AJ3122/12 User Manual

RADIO

You can use this set solely as a radio!
1 Adjust RADIO / ALARM to RADIO ON to switch on the radio.
2 Select your waveband by adjusting the FM/MW switch.
3 Adjust TUNING to tune to your desired station.
4 Turn the VOLUME control to adjust the volume level.
5 Adjust RADIO / ALARM to OFF to switch off the radio.
To improve reception:
FM:
Extend and position the pigtail fully to obtain optimal recep-
tion.
MW:
uses a built-in antenna inside the set. Direct the antenna by
adjusting the position of your set.
SETTING THE CLOCK / ALARM TIME
1 Press and hold SET TIME / ALARM SET for more than two sec-
onds.
™ The time digits flash.
2 Press HR or MIN repeatedly, or hold down HR or MIN to adjust min-
ute and/or hour.
3 Press SET TIME / ALARM SET to confirm the setting.
™ The set clock time will show on the display and start to run.