Philips AJ300D Owner's Manual page 15

DOCK ADAPTERS
Before plugging your player in the dock, snap the suitable dock adaptor into the
dock to provide a snug fit for the player to be docked.
Selecting the correct dock adaptor
• For the iPod dock, 8 dock adaptors of different type, as indicated at the back of
the adaptor, are included to fit the following iPod:
20GB, 40GB, 20/30GB photo, 40/60GB photo, 30GB video, 60GB video, mini
and nano.
• For the Philips GoGear dock, 4 dock adaptors of different type are included.
Each adaptor is marked a number from "1" to "4" at its back. These numbers
indicate the fit Philips GoGear players as follows:
"1" = HDD6320/6330
"2" = HDD1420/1620/1630/1635/1820/1830/1835
"3" = HDD1840/1850
"4" = SA9100/SA9200
PLAYING iPod/PHILIPS GoGear USING AJ300D
1 Snap the compatible iPod/GoGear into the dock connector.
2 Press DOCK to switch on the dock mode.
• Make sure that you have powered on Philips GoGear before selecting DOCK
source.
™ On the AJ300D's display, "GoGear" is displayed when GoGear player is
connected, or "iPod" is displayed when iPod is connected.
3 For iPod, the connected player will play automatically.
• For Philips GoGear, press 2; to start playback.
Notes:
– By using the buttons ( 2;, ¡1, 2 ™ and VOLUME ) on the AJ300D and its
remote control, the following disc playback features are available: Play/Pause,
selecting next/previous track, fast forwarding/rewinding (only available to Apple
iPod) and changing volume.
– The buttons ( 2;, ¡1, 2 ™ and VOLUME ) on the AJ300D and its remote control
can work only with playback of the audio contents stored on the docked player.
SLEEP
This set has a built-in sleep timer, which enables the radio to be automatically
switched off after a set period of time. There are four sleep time options.