Setup2 - Sony Cyber-shot DSC-S40 User's Manual / Troubleshooting

._.'_
Setup2
Fordetai/s o, the operatio, _ page 41
2
The defaull seltings are marked wilh _¢_.
Selects the method used to assign file numbers to images.
&
Series
Assigns numbers to files in sequence even if the recording
folder or the 'Memory Stick" is changed. (When the replaced
"Memory Stick" contains a file with a number higher than the
last assigned number, a number one higher than the largest
number is assigned.)
Reset Starts from 0001 each time the folder is changed. (When the
recording fokler contains a file, a number one higher than the
largest number is assigned.)
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the USB cable.
PietBridge Connects the camera to a PictBridge compliant printer (page
65).
PTP When [PTP] (Picture Transfer Protocol) is set and the career i
is connected to a computer, the images in the recording timer
selected by the camera are copied to the computer.
(Compatible with Windows XP and Mac OS X.)
Normal Connects thecamera to a computer (page54).
Sets the date and time.
OK Select [OK] with • on the control buttom and press O. Them
perform the procedure explained in "Set the clock" l_ s,Yp 2
i_i"Read This First').
Cancel Cancels setting the clock.
5O