Setup2 - Sony Cyber-shot DSC-W5 User's Manual / Troubleshooting

Setup2 For dota. o.tho o l, o,.io, l, go 4 4
2
The default settings are marked wflh _.
Selects the method used to assign file numbers to images.
Series Assigns numbers to files in sequence even if the recording
folder or the 'Memory Stick" is changed. (When the replaced
"Memory Stick" contains a file with a number higher than the
last assigned number, a number one higher than the largest
number is assigned.)
Reset
Starts from 0001 each time the lblder is changed. (When the
recording folder contains a file, a number one higher than the
largest number is assigned.)
Selects the USB mode to be used when connecting the camera to a computer or a PictBridge
compliant printer using the USB cable.
PictBridge Connects the camera to a PictBridge compliant printer (page
69).
PTP When [PTP] (Picture Transfer Protocol) is set and the career,
is connected to a computer, the images in the recording lblder
selected by the camera are copied to the computer.
(Compatible with Windows XP and Mac OS X.)
Normal Connects the camera to a computer (page 58).
Sets the vide() signal output according to connected equipment.
NTSC Scls the video output signal to NTSC mode (e.g., for the
USA_ Japan).
PAL
Scls the vide() output signal to PAL mode (e.g., lbr Europe).
53