Sony Cyber-shot DSC-S40 User's Manual / Troubleshooting page 63

Todisconnect theUSBcable/remove
the "Mlemory Stick"/turn off the
camera
Drag and drop the drive icon or tile icon of
the "Memory Stick" to the "Trash" icon.
then remove the USB cable, remove the
"Memory Stick". or turn oil' the camera.
• If you are using Mac OS X v10.0. perlonn lhe
procedure above alter you have turned your
computer oil
• You can create an image file that is compalible
wilh the video CD crealion l]ulction, To save lhe
data in the video CD lkwmat on a CD-R, you
need Toasl (nol supplied) by Roxio.
To install "lmagelVlixer VCD2"
• Shul down _dlother _q_plication s oftware belore
you install "hn_lgeMixer VC[)2,"
• The
display sellings
should be 1024 x 768 dots
or higher and 32,00Ucolors or higher.
(_) Turn on your Macintosh computer, md
inserl the CD-ROM (supplied) into the
CD-ROM drive.
@ Double-click the CD-ROM icon.
@ Copy the [IMXINST.SIT] file in the
[MAC] folder to the hard disk icon.
(_) Double-click the [IMXINST.SIT] file in
the copy-to folder.
(_) Double-click the extracted [hnageMixer
VCD2 Install] file.
(_) Afler Ihe user informltion screen appears,
enler Ihe desired nalile and password.
The
]nstalhtlion of the software slarls.
To start up "lmageMlixer VCD2"
Open [Image Mixer] in [Application], then
double-click ImageMixer VCD2 .
For informationon the use ofthe
software
(-'lick 17]at the upper-right corner of each
screen to show the on-line help.
Technical support for "lmageMixer
VCD2" is provided by the Pixela User
Support Center. For more
information, refer to the information
included on the CD-ROM,
63