500137-N - 3 iN. (7.6 cM) chiPPER ShREDDER
Operation Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
SYmBol
Throttle: Full Speed
Throttle: low Speed
Quickstart Label Symbols
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation of these
symbols will allow you to more safely operate the product.
Starting the Engine
move chipper-shredder outside and far away from
windows, doors and intake ventilation covers.
1. Check oil level.
Recommended oil is 10W-30.
2. Move the fuel valve to the "OPEN" position.
3. Press the engine switch to the "ON" position.
4. Move the choke lever to the "CHOKE" position.
5. Pull the starter cord.
6. Move the choke lever to the "RUN" position.
mEaninG
1
2
10W-30
4
5
DANGER
Artwork Notes
3mm corner radius; 2mm safe margin; to be printed
on WHITE substrate.
This artwork belongs to Champion Power Equipment. The contents are confidential and privileged and shall not be disclosed to or used by or for
outside parties without the explicit consent of Champion Power Equipment.
SYmBol
3
6
Stopping the Engine
1. Move the fuel valve to the "CLOSED" position.
2. Press the engine switch to the "OFF" position.
APN
3627-L-OP
Colors
Rev
A
K
376
Size
120 x 35.5 mm
Revision Changes
9
iMPORTANT SAfETY iNSTRUcTiONS
mEaninG
ChoKE: left position
run: right Position
Fuel lever
ON: left position
OFF: right Position
1
2
485
152
CG1