Cleaning By Operator; Cleaning Supply And Take-Up Stackers; Cleaning Read Head - IBM 2671 Manual

Cleaning by Operator
The operator should do the following cleaning tasks at least
once a week (or more often, if necessary). All cleaning must
be performed with the 2671 unloaded.
CLEANING SUPPLY AND TAKE-UP STACKERS
To clean the supply and take-up stackers (Figure 9):
1. Unscrew and remove the bolts holding the clear plastic
covers in position; remove the covers.
2. Blow out all dust and chads.
3. Resecure the clear plastic covers.
CLEANING READ HEAD
To clean the read head:
CAUTION
Do not touch anything under the covers.
1. Lift off lamp cover.
2. Lift out plastic front guide.
3. Blow out all dust and chads.
4. Push front guide back into position.
5. Push back lamp cover.
Take-Up Stacker
Clear Plastic Cover
Bolts
Supply Stacker
Clear Plastic Cover
Plastic Front Guide Lamp Cover
Figure 9. Tape Path Cleaning [08312]
Cleaning by Operator 23