Table of Contents
Advertisement
1.13 IMMERGAS FLUE SYSTEMS
For the types of installation of the flue systems approved for this product, scrupulously follow what is indicated in the table in
paragraph 4.3, in the "type of appliance" line.
Immergas supplies various solutions separately from the appliances regarding the installation of air intake and flue exhaust terminals,
which are fundamental for appliance operation.
These solutions form an integral part of the product.
The appliance must be installed with an original Immergas "Green Range" inspectionable air intake system and flue gas extrac-
tion system made of plastic, with the exception of configuration C
the regulations in force and by the product's approval. This flue can be identified by an identification mark and special distinc-
tive marking bearing the note "only for condensation boilers".
For non-original flue system, refer to the technical data of the appliance.
The plastic pipes cannot be installed outdoors, for tracts longer than 40 cm, without suitable protection from UV rays and other
atmospheric agents.
in the configurations envisaged in Parag. 1.12, as required by
6
29
Advertisement
Table of Contents
