Table of Contents
Advertisement
If you want to exit a parameter without changing its value, press the button "
Wait for 15 minutes or press the "
Menu
+
"P", "t", "A", "S"
> 5"
94
The first digit of the central indicator (Fig. 52) shows the family of the param-
eter, while the second digit shows its number.
60
Pressing the mode of operation button "
lected parameter and by pressing the buttons to adjust the central heating
temperature " " you can adjust its value.
61
Press the mode of operation button "
the parameter value; confirmation is given by the word "
for 2 seconds.
62
" button to exit programming mode.
Programming phase sequence
P0 - P5
t0 - t9
←
A0 - A6
→
S0 - S2
".
Parameter value
←
→
" displays the value of the se-
" for more than 1 second to store
" which appears
←
(without
memorising)
> 1''
(Memorise)
Advertisement
Table of Contents
