Table of Contents
Advertisement
Chengdu Ebyte Electronic Technology Co.,Ltd.
E95-DTU(433C20-485)-V2.0
E95-DTU(433C30-485)-V2.0
Ⅵ Relay Networking Mode Usage
Seria
l
numbe
r
After setting the relay mode through the configuration mode, switch to the general mode and the
1
relay starts working.
In relay mode ADDH and ADDL are no longer used as radio addresses, but correspond to NETID forwarding
2
pairing respectively, and if one of the networks is received, it is forwarded to the other network;
the repeater's own network ID is invalid.
3
In relay mode, the relay radio cannot send and receive data for low-power operation.
Entering from mode 3 (sleep mode) or during a reset, the radio resets the user parameters, during
4
which the AUX output goes low.
Relay networking rule description:
1、forwarding rules, relay can forward data in both directions between two NETIDs.
2、In relay mode, ADDH\ADDL is no longer used as a radio address and is forwarded as a NETID pair.
As shown:
First class relay
1
"Node 1" NETID is 08.
"Node 2" NETID is 33.
The ADDH\ADDL of relay 1 is 08, 33 respectively.
So the signal sent by node 1 (08) can be forwarded to node 2 (33)
Copyright ©2012–2023，Chengdu Ebyte Electronic Technology Co.,Ltd.
433MHz
0x0000
0x2E
433MHz
0x0000
0x2E
Description of relay mode
E95-DTU(433Cxx-485)-V2.0 User manual
0.5kbps
9600
0.5kbps
9600
Format
8N1
20dbm
8N1
30dbm
20
Advertisement
Table of Contents
