Set Password - Advantech PCA-6742 User Manual

Half-size cpu card

Hide thumbs Also See for PCA-6742:

Table of Contents

3.2.8

Set Password

Note!

To enable this feature, you should first go to the Advanced BIOS Fea-

tures menu, choose the Security Option, and select either Setup or Sys-

tem, depending on which aspect you want password protected. Setup

requires a password only to enter Setup. System requires the password

either to enter Setup or to boot the system. A password may be at most

8 characters long.

To Establish Password

Choose the Set Password option from the CMOS Setup Utility main menu and

press <Enter>.

When you see Enter Password, enter the desired password and press <Enter>.

At the Confirm Password prompt, retype the desired password, and then press

<Enter>.

Select Save to CMOS and EXIT, type <Y>, then <Enter>.

To Change Password

Choose the Set Password option from the CMOS Setup Utility main menu and

press <Enter>.

When you see Enter Password, enter the existing password and press <Enter>.

You will see Confirm Password. Type it again, and press <Enter>.

Select Set Password again, and at the Enter Password prompt, enter the new

password and press <Enter>.

At the Confirm Password prompt, retype the new password, and press <Enter>.

Select Save to CMOS and EXIT, type <Y>, then <Enter>.

PCA-6742 User Manual

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents

Eva-x4300