Matsui M152CW14E Instruction Manual page 18

INSTALLATION
9. Remove and replace the pin on the
reverse side of the hinge.
GB
10. Carefully set the upper door back into
place. Re-attach the re-assembled upper
door hinge on the opposite side of the
unit. Ensure the fridge door is aligned
horizontally and vertically so that the
seals are closed on all sides before finally
tightening the top hinge.
11. On the top panel move the blanking
plate to the side opposite the hinge.
12. Put the top cover back on and fix it in
place with the screws.
13. With the door closed, check that the
door is aligned horizontally and vertically
and that the seals are closed on all sides
before finally tightening the bottom
hinge. Re-adjust the levelling feet as
needed.
18
180˚
unscrew screw