Hokuetsu AIRMAN PDS185S-6EZ1 Instruction Manual page 8

M003
H990432
W004-1
A100285

The engine of this machine and electrical parts many electronic devices have been installed.
If you perform welding work on this machine, first remove the connector of the electronic control
equipment (specifically the ECM). Application of excessive current to electronic controls can cause
equipment malfunction.
Safety

When cleaning dust accumulated in such devices as the air-filter, by blowing
compressed air, wear safety glasses, etc. to protect your eyes.

Be sure to stop the engine, and let the coolant water sufficiently cool down
before draining it.

If the drain valve is opened before the coolant water is cool enough, hot
scalding water could jet out, causing burns.

Be sure to perform the periodic checks of compressor oil and oil separator
element.

Neglecting checks could cause overheat of the oil, resulting in a fire.

Waste liquid from the machine contains harmful material. Do not discharge it
onto the ground or into the river, lake or sea. Such material will contaminate
the environment.

Be sure to use a container to hold the waste liquid from the machine.

Be sure to follow the designated regulations when disposing of oil, fuel,
coolant (antifreeze), filter, battery or other harmful materials.
S-6