Table of Contents
Advertisement
3.3.7 Check fuel filter for condensate
If the red float [A] inside the fuel filter is above line, drain water from the fuel filter.
Outlet
Priming pump
D
Element
A
B
When checking, do not use alcoholic parts cleaner for cleaning. If it sticks to plastic parts, which might
causes cracks and less visual recognition for fuel level. In worst case, which might causes cracks and
fuel leaks.
3.3.8 Check wiring of each part
Check each wiring for any loose connection, damage to insulating sheathed portion, disconnection,
and short-circuit.
3.3.9 Check piping of each part
Check each piping for any loose connection and also check each hose and pipe for any tear and
leaks.
3. Operation
Inlet
C
Drain level
A180796-1
<Procedures>
1. Before draining water, attach a drain hose to the
drain plug [B].
2. Prepare a container. Loosen drain plug [B] and air
bleeding plug [C] to drain.
3. After draining finished, be sure to tighten [B] and
[C].
Do not remove fuel filter case as fuel is overflow if it
is removed. If it is necessary to remove it, plug inlet
hose with a clip etc.
Drain the condensate in container, and then dispose
of condensate according to the designated
regulations.
3-8
Advertisement
Chapters
Table of Contents
