Periodic Inspection/Maintenance; Important Items As Periodic Inspection And Maintenance Or After Maintenance - Hokuetsu AIRMAN PDS185S-6EZ1 Instruction Manual

5. Periodic Inspection/Maintenance

5.1 Important Items at Periodic Inspection and Maintenance or after
Maintenance
This manual shows the inspection and maintenance intervals under normal operating conditions, not
the warranty period. When using under severe environmental conditions or operating conditions,
shorten the maintenance interval.

Please wear protection implements, such as a helmet, protection glasses, earplugs, safety shoes, a
glove, and a protection-against-dust mask, according to the contents of work for safety.

Take care not to touch hot portions of the machine while inspecting during operation. Such parts as
engine, exhaust manifold, exhaust pipe, muffler, radiator, oil cooler, air-end, pipe, separator
receiver tank, and discharging pipe are especially hot, so never touch these parts, it will cause
burning.
Hang an "Under Maintenance" tag
SY001
Prevention of oil separator from catching fire
A

Before starting inspection, make sure to turn the CONTROL POWER
switch to "OFF", and then lock the door on the front of the instrument
panel, remove the key, and hang up a "Now Checking and under
Maintenance" tag where it can be easily seen.The checker must keep the
key during checking and maintenance.

Remove the negative (–) side cable from the battery. If the above
procedure is neglected, and another person starts operating the machine
during check or maintenance, it could cause serious injury.

Be sure to perform following periodic inspection and
maintenance:
A. Check and change compressor oil quantity
B. Change oil separator
B
A130988
5-1