Operation; Instrument Panel - Hokuetsu AIRMAN PDS185S-6EZ1 Instruction Manual

3.1 Instrument Panel

Each display of the instrument panel is illustrated as follows.
Read and fully understand the explanations and be sure to operate safely:
AIR PRESSURE gauge
MONITOR CHANGE switch
When power is supplied, revolution speed (lamp lighting) is indicated.
Whenever indication selector switch is pushed every time, indication screen is changed by
turns as shown below.
[ENG.SPEED]
(2,400min
※In case that discharge air temperature/cooling water temperature is below 32°F, "－－－L" is
indicated on screen.

3. Operation

When this switch is pushed on while lamp is blinking, it shows error code.
When control power switch to the
※For details of the blinking state (warning) and the illumination state
(trouble) of failure codes, refer to 4.1.
ERROR CODE lamp
INDICATOR lamp FUEL LEVEL lamp
[DISCHARGE TEMP.]
(210°F)
)
-1
Push
ERROR CODE switch
position,
ENGINE ERROR lamp
RESIDUAL PRESSURE lamp
Digital monitor
[WATER TEMP]
(194°F)
Push
3-1
displayed screen is reset.
CONTROL POWER switch
START button
[HOUR METER]
(30Hr)
Push
A220255E
Push