Check, Clean Additional Fuel Strainer - Komatsu ecot 3 Operation & Maintenance Manual

Table of Contents

CHECK, CLEAN ADDITIONAL FUEL STRAINER

(If equipped)

1. Open cover (1).

2. Close fuel supply valve (2), then remove strainer cap (3).

The strainer forms one unit with the strainer cap.

3. Remove any dirt stuck to the strainer, then wash in clean diesel

fuel or flushing oil. If the strainer is damaged, replace it.

4. After checking and cleaning, install the strainer, then tighten

5. After installing, open fuel supply valve (2).

SERVICE PROCEDURE

Table of Contents