Table of Contents
Advertisement
Quick Links
MODELS: HPB1006
HPB1006A
HPB3006A
SFA Companies
E-mail: sales@bvahydraulics.com
Maximum Operating Pressure 10,000 PSI
HPB1006
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419
*
HPB1006A
Single Acting
Pull Cylinders
Instruction Manual
10 Ton capacity
10 Ton capacity
30 Ton capacity
Fax: 816-448-2142
Website: www.bvahydraulics.com
HPB1006-M2_092016
HPB3006A
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BVA Hydraulics HPB1006
Summary of Contents for BVA Hydraulics HPB1006
- Page 1 HPB1006-M2_092016 Single Acting Pull Cylinders Instruction Manual MODELS: HPB1006 10 Ton capacity HPB1006A 10 Ton capacity HPB3006A 30 Ton capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Maximum Operating Pressure 10,000 PSI...
-
Page 2: Safety And General Information
BVA Hydraulics authorized service center. Owners WARNING: To reduce the risk of personal injury and/or and operators of this equipment shall be aware that the use and... -
Page 3: Installation
WARNING Failure to comply with the following warnings may Do not pull, position or move cylinder setup by the result in personal injury as well as property hose. Use carrying handle or other means of safe damage. transport. • Study, understand, and follow all instructions Do not handle pressurized hoses. -
Page 4: Operation
MAINTENANCE damage thereof. 1. Inspect hoses and connections daily. Replace damaged components immediately with BVA Hydraulics Replacement How to remove faulty coupler: Parts only. If cylinder does not retract, 2. Tighten connections as needed. Use pipe thread sealing 1. - Page 5 28.88” 21.02” 1.26” 24.80” M85X2-2A 1.18” 3/8"-18NPTF M30X2 M30X2 Figure 4- HPB1006 Specifications 1.26” 28.17” 22.24” 0.87” M85X2-2A 4.53” M30X2 3/8"-18NPTF M30X2 Figure 5- HPB1006A Specifications 52.74 ” 48.8” 42.2” 3/8"-18NPTF 1.97” 5.75” 5.75” 1 1/4"-7UNC 1 1/4"-7UNC Figure 6 - HPB3006A Specifications...
-
Page 6: Troubleshooting Guide
MAINTENANCE (cont.) NOTICE: Do not attempt to grasp with pliers or wrench without first wrapping the jaws of such tool with rags or similar padding. How to bleed air from system: 1. Place pump at a higher elevation than the hose and cylinder as shown in Figure 7. - Page 7 4 Rubber Bellow H20-4-2801-108 4.1 Rubber Bellow H20-6-2815-101 4.2 Flange Plate H20-6-2816-103 5 Dust Cover CDC38 6 Screw 659-1-0050-008 7 Strap H20-6-2817-105 Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
- Page 8 3 H20-6-2814-109 Insert Screw 4 644-1-0040-204 Screw 5 H20-4-2801-108 Rubber Bellow 6 CDC38 Dust Cover 7 659-1-0050-200 Screw 8 H20-6-2817-105 Strap Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
- Page 9 5 Cylinder Adaptor H33-6-1329-106 6 Thread Rod H33-6-1330-101 7 Screw 644-1-0080-004 8 Spring Pin 601-4-0060-030 9 Dust Cover CDC38 Repair kit H32-3-9901-103 Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
- Page 10 (*) - indicates items included in, and available only as part of Repair Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
- Page 11 (*) - indicates items included in, and available only as part of Seal Kit N/A - part is not available as replacement H32-6-1104-206 Saddle Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only. H32-3-9901-103 Repair kit...
-
Page 12: Limited Lifetime Warranty
This warranty does not cover ordinary wear and tear, overloading, alterations (including repairs or attempted repairs not performed by BVA Hydraulics or one of its authorized personnel), improper fluid use, or use of the product in any manner for which the product was not intended or the use of which is not in accordance with the instructions or warnings provided with the product.
Need help?
Do you have a question about the HPB1006 and is the answer not in the manual?
Questions and answers