Advertisement
Quick Links
MODELS:
H5502, H5504, H5506, H5513
H7516, H7513
H10002A, H10006 & H10010
SFA Companies
E-mail: sales@bvahydraulics.com
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Maximum Operating Pressure 10,000 PSI
• Leer, comprender, y seguir las instrucciónes antes de utilizar el aparato.
• El manual de instrucciónes y la información de seguridad deben estar comunicado en lengua del operador
antes del uso.
• No seguir estas indicaciónes puede causar daños personales o materiales.
Single Acting Cylinders
10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419
*
ADVERTENCIA
!
Instruction Manual
- 55 Ton Capacity
- 75 Ton Capacity
- 100 Ton Capacity
Fax: 816-891-6599
Website: www.bvahydraulics.com
H5502-M0 rev 12/07
Printed in Taiwan
Advertisement
Related Manuals for BVA Hydraulics H7516
Summary of Contents for BVA Hydraulics H7516
- Page 1 H5502-M0 rev 12/07 Single Acting Cylinders Instruction Manual MODELS: H5502, H5504, H5506, H5513 - 55 Ton Capacity H7516, H7513 - 75 Ton Capacity H10002A, H10006 & H10010 - 100 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153...
- Page 2 (a load dropped suddenly, unexpectedly upon rated working pressure developed by the hydraulic pump. it), discontinue use until checked out by a BVA Hydraulics authorized service center. Owners and operators of this equipment shall be aware that the use and subsequent...
- Page 3 10,000 psi. refer repairs to qualified, authorized personal. • Do not connect a cylinder to a pump with higher Contact BVA Hydraulics tech service for authorized pressure rating. service center. • Do not subject cylinder to a shock loads, a load...
- Page 4 2. If a cylinder or ram has been exposed to rain, snow, 2. Verify that the product and the application are compatible. sand, airborne abrasive, or any corrosive environment, it If in doubt, call BVA Hydraulics Technical Service (888) must be cleaned, lubricated, and protected immediately 332-6419.
- Page 5 TROUBLESHOOTING GUIDE The following information is intended as an aid in determining if problem exists. Cylinders should be repaired only by authorized BVA Service Center. For repair service, contact service center in your area. Symptom Possible Causes Corrective Action Erratic action •...
- Page 6 (*) - indicates items included in, and available only as part of Seal Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
- Page 7 Item Part Number Description Qty. Item Part Number Description Qty. Cylinder Housing Back-up Ring Ram Plunger U-cup H55-6-1103-100 Saddle Washer 649-1-0010-109 Bolt 649-1-0100-302 Bolt H55-6-2305-107 Protecting Cap CH38F Female Coupler (3/8”-18NPTF) Dust Seal H02-4-6003-108 Dust Cover H55-5-1804-104 Upper Bearing H02-6-1008-105 Rubber Plug H55-4-0204-109 Return Spring Assy.
- Page 8 * - indicates items included in, and available only as part of Seal Kit; N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
- Page 9 Item Part Number Description Qty. Item Part Number Description Qty. Cylinder Housing U-cup Ram Plunger Washer H55-6-1103-100 Saddle 649-1-0100-403 Bolt 649-1-0010-109 Bolt CH38F Female Coupler (3/8”-18NPTF) H75-6-2305-103 Protecting Cap H02-4-6003-108 Dust Cover Dust Seal H02-6-1008-105 Rubber Plug H75-5-1804-100 Upper Bearing H55-3-1806-106 Handle Assy.
- Page 10 Item Part Number Description Qty. Item Part Number Description Qty. Cylinder Housing H99-5-1204-100 Bearing Ram Plunger Back-up Ring H55-6-1103-100 Saddle U-cup 649-1-0010-109 Bolt Washer H99-6-2305-208 Protecting Cap 649-1-0100-302 Bolt Dust Seal CH38F Female Coupler (3/8”-18NPTF) H99-5-1804-205 Upper Bearing H02-4-6003-108 Dust Cover H99-6-2100-109 Spring Base H02-6-1008-105...
- Page 11 Item Part Number Description Qty. Item Part Number Description Qty. Cylinder Housing H99-5-1204-100 Bearing Ram Plunger Back-up Ring H55-6-1103-100 Saddle U-cup 649-1-0010-109 Bolt Washer H99-6-2305-107 Protecting Cap 649-1-0100-403 Bolt Dust Seal CH38F Female Coupler (3/8”-18NPTF) H99-5-1804-104 Upper Bearing H02-4-6003-108 Dust Cover H99-6-2100-109 Spring Base H02-6-1008-105...
- Page 12 • Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or couplers as well as worn out seals, o-rings and springs are the result of misuse and not covered by warranty and BVA Hydraulics will not provide any warranty credit for such damaged components.
Need help?
Do you have a question about the H7516 and is the answer not in the manual?
Questions and answers