Table of Contents
Advertisement
Quick Links
MODELS: HGPT06
E-mail: sales@bvahydraulics.com
Maximum Operating Pressure 10,000 PSI
HGPT06
• Leer, comprender, y seguir las instrucciónes antes de utilizar el aparato.
• El manual de instrucciónes y la información de seguridad deben estar comunicado en lengua del operador
antes del uso.
• No seguir estas indicaciónes puede causar daños personales o materiales.
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
HGPT12
HGPT20
HGPT30
HGPT50
SFA Companies
10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419
!
ADVERTENCIA
Hydraulic Gear Puller
Instruction Manual
- 6 Ton Capacity
- 12 Ton Capacity
- 20 Ton Capacity
- 30 Ton Capacity
- 50 Ton Capacity
*
Fax: 816-448-2142
Website: www.bvahydraulics.com
HGPT06-M0 _102021
HGPT12
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BVA Hydraulics HGPT06
Summary of Contents for BVA Hydraulics HGPT06
- Page 1 HGPT06-M0 _102021 Hydraulic Gear Puller Instruction Manual MODELS: HGPT06 - 6 Ton Capacity HGPT12 - 12 Ton Capacity HGPT20 - 20 Ton Capacity HGPT30 - 30 Ton Capacity HGPT50 - 50 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153...
-
Page 2: Safety And General Information
(a load dropped suddenly, unexpectedly upon NEVER use hydraulic cylinder as a support device! it), discontinue use until checked out by a BVA Hydraulics authorized service center. Owners and operators of this Always check connections before using. Alteration equipment shall be aware that the use and subsequent of these products is strictly prohibited. -
Page 3: Specifications
Rated Effective Max. Max. Tip (In.) Jaw Tip (In.) Model Weight (In.) Capacity Area Reach Spread (Lbs.) (Ton) (In²) (In.) (In.) HGPT06 1.76 1.25 9.65 12.99 1.77 0.91 3.58 0.51 0.39 0.87 11.9 HGPT12 3.35 2.24 10.24 14.76 2.36 1.10 4.65... -
Page 4: Installation
The cylinder is refer repairs to qualified, authorized personal. designed for a max. pressure of 10,000 psi. Contact BVA Hydraulics tech service for • Do not connect a cylinder to a pump with authorized service center. -
Page 5: Before Use
2. Verify that the product and the application are compatible. 2. If a cylinder or ram has been exposed to rain, snow, If in doubt, call BVA Hydraulics Technical Service (888) sand, airborne abrasive, or any corrosive environment, it 332-6419. -
Page 6: Troubleshooting Guide
TROUBLESHOOTING GUIDE The following information is intended as an aid in determining if problem exists. Cylinders should be repaired only by authorized BVA Service Center. For repair service, contact service center in your area. Symptom Possible Causes Corrective Action Erratic action •... -
Page 7: Parts Illustration
10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Parts Illustration CDC38, Dust Cap CH38F, Quick Coupler, Dust Cap Included HGPT06 Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only. - Page 8 • Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or couplers as well as worn out seals, o-rings and springs are the result of misuse and not covered by warranty and BVA Hydraulics will not provide any warranty credit for such damaged components.
Need help?
Do you have a question about the HGPT06 and is the answer not in the manual?
Questions and answers