Table of Contents
Advertisement
Quick Links
SFA Companies
Model No. F9902
E-mail: sales@bvahydraulics.com
Maximum Operating Pressure 10,000 PSI
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Approved By:
Date: 2019.12.12
Double Acting Cylinders
MODELS: HD10002, HD10002US
100 Ton Capacity
10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419
*
HD10002 Shown
Checked By:
File name: F9902_1912OUT
Instruction Manual
Fax: 816-448-2142
Website: www.bvahydraulics.com
Drawn By: TOM
HD10002-M0_072020
Advertisement
Table of Contents
Related Manuals for BVA Hydraulics HD10002
Summary of Contents for BVA Hydraulics HD10002
- Page 1 HD10002-M0_072020 Double Acting Cylinders Instruction Manual MODELS: HD10002, HD10002US 100 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Model No. F9902 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Maximum Operating Pressure 10,000 PSI HD10002 Shown This is the safety alert symbol.
-
Page 2: Safety And General Information
1. Before using this product, read the owner's manual completely (a load dropped suddenly, unexpectedly upon it), discontinue and familiarize yourself thoroughly with the product, its use until checked out by a BVA Hydraulics authorized service components and recognize the hazards associated with its use. center. Owners and operators of this equipment shall be aware 2. -
Page 3: Installation
WARNING Failure to comply with the following warnings may Do not pull, position or move cylinder setup by the result in personal injury as well as property hose. Use carrying handle or other means of safe transport. damage. • Study, understand, and follow all instructions Do not handle pressurized hoses. -
Page 4: Specifications
Oil Capacity Capacity Model Stroke Area Capacity (tons) Number (in) (psi) Push Pull Push Pull Push Pull Push Pull HD10002 102.85 47.95 20.57 9,723 10,000 41.15 19.17 HD10002US Collapsed Extended Mounting Model Weight Cylinder Dia. Height Height Collar Thread Hole Dia. -
Page 5: Operation
The objective is to force the air bubbles up hill and back to 1. Inspect hoses and connections daily. Replace damaged the pump reservoir. components immediately with BVA Hydraulics Replacement 3. Follow pump instruction manual to bleed the air from pump Parts only. -
Page 6: Troubleshooting Guide
TROUBLESHOOTING GUIDE The following information is intended as an aid in determining if problem exists. Cylinders should be repaired only by authorized BVA Service Center. For repair service, contact service center in your area. Symptom Possible Causes Corrective Action • Air in system or pump cavitation. • Vent the system (refer to figure 2). - Page 7 Double Acting Cylinders Service Parts MODELS: HD10002, HD10002US SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Note: Not all components of the pump are replacement items, but are illustrated as a convenient reference of location and position in the assembly sequence.
- Page 8 (*) - indicates items included in, and available only as part of Repair Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
- Page 9 • Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or couplers as well as worn out seals, o-rings and springs are the result of misuse and not covered by warranty and BVA Hydraulics will not provide any warranty credit for such damaged components.
- Page 10 NOTES: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 E-mail: sales@bvahydraulics.com...
- Page 11 NOTES: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 E-mail: sales@bvahydraulics.com...
- Page 12 NOTES: SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 E-mail: sales@bvahydraulics.com...
Need help?
Do you have a question about the HD10002 and is the answer not in the manual?
Questions and answers