Table of Contents
Advertisement
Quick Links
MODEL: HD15002, HD15006, HD15013, HD15018 - 150 Ton Capacity
SFA Companies
E-mail: sales@bvahydraulics.com
Maximum Operating Pressure 10,000 PSI
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Double Acting Cylinder
10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419
*
High Tonnage
Instruction Manual
Fax: 816-448-2142
Website: www.bvahydraulics.com
HD15002-M0_062017
Printed in Taiwan
Advertisement
Table of Contents
Related Manuals for BVA Hydraulics HD15002
Summary of Contents for BVA Hydraulics HD15002
- Page 1 HD15002-M0_062017 High Tonnage Double Acting Cylinder Instruction Manual MODEL: HD15002, HD15006, HD15013, HD15018 - 150 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Maximum Operating Pressure 10,000 PSI This is the safety alert symbol.
-
Page 2: Safety And General Information
BVA Hydraulics authorized service center. Owners components and recognize the hazards associated with its use. and operators of this equipment shall be aware that the use and 2. -
Page 3: Installation
WARNING Failure to comply with the following warnings may Do not pull, position or move cylinder setup by the result in personal injury as well as property hose. Use carrying handle or other means of safe transport. damage. • Study, understand, and follow all instructions Do not handle pressurized hoses. Never attempt provided with and on this device before use. to grasp a leaking pressurized hose. Ensure to • The user must be a qualified operator familiar release the system pressure before disconnecting with the correct operation, maintenance, and use of cylinders. -
Page 4: Specifications
Cylinders should be stored vertically with ram plunger fully retracted 1. Inspect hoses and connections daily. Replace damaged in a dry, protected area, not exposed to corrosive vapor, dust or components immediately with BVA Hydraulics Replacement other harmful elements. When a cylinder has not been used for Parts only. -
Page 5: Troubleshooting Guide
MAINTENANCE (cont.) NOTICE: Do not attempt to grasp with pliers or wrench without first wrapping the jaws of such tool with rags or similar padding. How to bleed air from system: 1. Place pump at a higher elevation than the hose and cylinder as shown in Figure 2. -
Page 6: Parts Illustration
(*) - indicates items included in, and available only as part of Repair Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only. -
Page 7: Service Parts
(*) - indicates items included in, and available only as part of Repair Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only. - Page 8 (*) - indicates items included in, and available only as part of Repair Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
- Page 9 (*) - indicates items included in, and available only as part of Repair Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
- Page 10 (*) - indicates items included in, and available only as part of Repair Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
- Page 11 (*) - indicates items included in, and available only as part of Repair Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
-
Page 12: Limited Lifetime Warranty
This warranty does not cover ordinary wear and tear, overloading, alterations (including repairs or attempted repairs not performed by BVA Hydraulics or one of its authorized personnel), improper fluid use, or use of the product in any manner for which the product was not intended or the use of which is not in accordance with the instructions or warnings provided with the product.
Need help?
Do you have a question about the HD15002 and is the answer not in the manual?
Questions and answers