Table of Contents
Advertisement
Quick Links
HVSP120-M0_092015
Single Acting Hollow
Hole Cylinder
MODELS: HVSP120 - 120 Ton Capacity
SFA Companies
10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419
*
Fax: 816-448-2142
E-mail: sales@bvahydraulics.com
Website: www.bvahydraulics.com
Maximum Operating Pressure 10,000 PSI
!
This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
Obey all safety messages that follow this symbol to avoid possible injury or death.
Printed in Taiwan
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BVA Hydraulics HVSP120
Summary of Contents for BVA Hydraulics HVSP120
- Page 1 HVSP120-M0_092015 Single Acting Hollow Hole Cylinder MODELS: HVSP120 - 120 Ton Capacity SFA Companies 10939 N. Pomona Ave. Kansas City, MO 64153 Tel: 888-332-6419 Fax: 816-448-2142 E-mail: sales@bvahydraulics.com Website: www.bvahydraulics.com Maximum Operating Pressure 10,000 PSI This is the safety alert symbol. It is used to alert you to potential personal injury hazards.
-
Page 2: Safety And General Information
BVA Hydraulics authorized service center. Owners 2. Verify that the product and the application are compatible. If in and operators of this equipment shall be aware that the use and doubt, call BVA Hydraulics Technical Service (888) 332-6419. -
Page 3: Installation
WARNING Failure to comply with the following warnings may Do not pull, position or move cylinder setup by the result in personal injury as well as property hose. Use carrying handle or other means of safe damage. transport. • Study, understand, and follow all instructions Do not handle pressurized hoses. -
Page 4: Specifications
1. Secure load by other means. MAINTENANCE 2. Depressurize pump and hose. 1. Inspect hoses and connections daily. Replace damaged components immediately with BVA Hydraulics Replacement 3. Remove the cylinder from application. Parts only. 4. Disconnect and replace with new coupler. -
Page 5: Troubleshooting Guide
TROUBLESHOOTING GUIDE The following information is intended as an aid in determining if problem exists. Cylinders should be repaired only by autho- rized BVA Service Center. For repair service, contact service center in your area. Symptom Possible Causes Corrective Action •... - Page 6 (*) - indicates items included in, and available only as part of Seal Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only.
-
Page 7: Part Number Description
(*) - indicates items included in, and available only as part of Seal Kit N/A - part is not available as replacement Note: To ensure safe and reliable performance, replace worn or damaged parts with BVA Hydraulics Authorized Replacement Parts only. -
Page 8: Limited Lifetime Warranty
• Damaged components, including but not limited to bent rams, dented or crushed cylinder walls, broken welds or couplers as well as worn out seals, o-rings and springs are the result of misuse and not covered by warranty and BVA Hydraulics will not provide any warranty credit for such damaged components.
Need help?
Do you have a question about the HVSP120 and is the answer not in the manual?
Questions and answers