Crestron STX-1550C Operation Manual page 15

2-way rf compact color touchpanel
Hide thumbs Also See for STX-1550C:
Table of Contents

Advertisement

Crestron STX-1550C
Programming Cable Specifications
Operations Guide - DOC. 5812A
2-Way RF Compact Color Touchpanel
1. Before making any connections to the touchpanel, verify that control
system is properly connected to the PC (using cable 15717 and adapter)
and powered on.
2. Attach the stereo connector end of the programming cable, part number
15710, to the touchpanel.
3. Attach the RJ11 connector end of the programming cable, part number
15710, to the connector labeled NET on the control system.
4. Attach the appropriate external power pack or equivalent to touchpanel
and plug into outlet. At the PC, make sure that no programs accessing
the COM port of the PC are running.
5. Start SIMPL Windows or VT Pro-e.
6. From the SIMPL Windows or VT Pro-e menu bar, select Tools |
Viewport to open the Crestron Viewport.
NOTE: SIMPL Windows may open with an opening splash screen and may display
the "What do you want to do?" dialog box. If so, close the dialog box and continue.
7. Refer to figure on the next page. From the Viewport menu, select
Setup | Communications settings (alternatively, depress Alt+D) to
open the Port Settings dialog box.
2-Way RF Compact Color Touchpanel: STX-1550C • 11

Advertisement

Table of Contents
loading

Table of Contents

Save PDF