Table of Contents
Advertisement
Crestron STX-1550C
Operations Guide - DOC. 5812A
2-Way RF Compact Color Touchpanel
3. As shown below, select the NET ID of the STX-1550C and then click
OK.
"Select Network ID" Dialog Box
NOTE: Firmware upgrades for touchpanels contain two files, xc[version]a file and
xc[version]b file. When selecting a firmware file, select the a file which will
automatically execute the b file.
4. As shown below, select the firmware (CSF) file and click Open. The
transfer will complete automatically.
Select CSF File
5. Disconnect the programming cable and the external power pack from
the touchpanel.
NOTE: When the firmware of the STX-1550C is upgraded, the associated
STRFGWX(s) must also be upgraded. The units will not function properly if not
upgraded with compatible firmware.
6. If the STRFGWX firmware upgrade HAS been completed, close the
Viewport, exit SIMPL Windows or VT Pro-e, and disconnect the
programming cable from the PC and the control system.
If NOT completed, perform the STRFGWX firmware upgrade utilizing
the firmware (UPG) file included with the download. Refer to the latest
revision of the Operations Guide (Doc. 5811) for the STRFGWX for
the firmware upgrade procedure. The latest version of the Operations
Guide can be obtained from the Downloads page (MANUAL Library)
of Crestron's website (www.crestron.com). New users are required to
register in order to obtain access to the FTP site.
2-Way RF Compact Color Touchpanel: STX-1550C • 15
Advertisement
Table of Contents
