Crestron STX-1550C Operation Manual page 16

2-Way RF Compact Color Touchpanel
12 • 2-Way RF Compact Color Touchpanel: STX-1550C
Accessing the Port Settings Dialog Box
8. Select the appropriate connection type. Verify that an available COM
port (COM 1 is shown below) is selected. Set the baud rate to 38400,
the parity to None, the data bits to Eight, and the stop bits to One.
Refer to the dialog box shown for the remaining settings and click the
OK button to save the settings and close the box.
Port Settings Dialog Box
9. Proceed to "Uploading a VT Pro-e Project" on the next page or
"Firmware Upgrade" that begins on page 14 as appropriate.
Crestron STX-1550C
Operations Guide - DOC. 5812A