Table of Contents
Advertisement
en Basic settings
Basic settings
13 Basic settings
You can configure the basic settings for your appliance to meet your needs.
13.1 Overview of the basic settings
Display
Setting
Childproof lock
Audible signals
Automatic switch-off of the cooking zones.
Duration of the timer end signal tone
Power limitation
Enables the total power of the hob to be lim-
ited, if necessary, based on the conditions of
your electrical installation. The available set-
tings depend on the maximum power of the
hob. You can find precise information on the
rating plate. If the function is active and the
hob has reached the set power limit,
played and you cannot select a higher power
level.
Time for selecting the cooking zone
Cookware test
You can use this function to test the quality
of the cookware.
Automatic management with power limitation
Restoring factory settings
1
Factory setting
13.2 To go to the basic settings
Requirement: The hob must be switched off.
To switch on the hob, touch
1.
Within the next 10 seconds, press and hold
2.
four seconds.
Product information
Directory for the technical after-sales
service (TK)
Production number
18
is dis-
.
for
Display
Value
1
- Manual.
Automatic.
– Switched off.
– Confirmation and fault signals are switched off.
– Only the fault signal is switched on.
– Only the confirmation signal is switched on.
– All signal tones are switched on
1
– switched off.
-
- minutes until the appliance switches off auto-
matically.
1
– 10 seconds
– 30 seconds
- 1 minute
- Switched off. Maximum power of the hob
- 1000 W. Lowest power setting.
. - 1500 W.
...
- 3000 W. Recommended for 13 A.
. - 3500 W. Recommended for 16 A.
- 4000 W.
. - 4500 W. Recommended for 20 A.
...
- Maximum power of the hob.
- Unlimited: You can adjust the last selected cooking
zone without having to select it again.
– Limited: You can adjust the last selected cooking
zone within 10 seconds after selecting it. After this time,
you must select the cooking zone again before adjusting
it.
- Not suitable.
- Not optimal.
- Suitable.
- Deactivated: Does not show the power limit unless
1
is activated.
- Switched on: Always displays the power limit.
1
- Individual settings
.
- Factory settings.
Product information
Production number 1
Production number 2
a The first four displays provide the product informa-
tion. Touch
or
Touch
to access the basic settings.
3.
and
light up alternately as well as as a preset
a
value.
Touch
repeatedly until the desired setting ap-
4.
pears.
5.
Use
or
to select the required value.
Touch and hold
6.
a The settings are saved.
1
.
1
.
1
Display
.
.
to view the individual displays.
for four seconds.
Advertisement
Table of Contents
