Table of Contents
Advertisement
SUN2000-(125KTL-M5, 200KTL-H4, 250KTL-H0,
286KTL-H0)
User Manual
5.
Step 4 Log in to the SmartLogger WebUI.
1.
2.
3.
Issue 04 (2023-09-22)
Figure 7-1 LAN settings
Click OK.
In the address box of a browser, enter https://XX.XX.XX.XX (XX.XX.XX.XX is the
IP address of the SmartLogger) and press Enter. The login page is displayed. If
you log in to the WebUI for the first time, a security risk warning is displayed.
Click Continue to this website to log in to the WebUI.
NO TE
– It is recommended that users use their own certificates. If the certificate is not
replaced, the security risk warning will be displayed during each login.
– After logging in to the WebUI, you can import a certificate under Maintenance >
Security Settings > Network Security Certificate.
– The imported security certificate needs to be bound to the SmartLogger IP address.
Otherwise, the security risk warning will still be displayed during login.
Figure 7-2 Security risk warning
Select a desired language.
Select the User Name and enter the Password according to the following
table, and then click Log In.
Copyright © Huawei Technologies Co., Ltd.
7 Power-On and Commissioning
59
Advertisement
Table of Contents
