Table of Contents
Advertisement
SUN2000-(125KTL-M5, 200KTL-H4, 250KTL-H0,
286KTL-H0)
User Manual
Figure 5-18 Connecting a plug
Step 4 Secure the plastic housing to the plug.
Figure 5-19 Connecting a plastic housing
Step 5 Insert the seal ring into the plastic housing and secure the coupling nut to the
plastic housing.
Figure 5-20 Connecting a seal ring and a coupling nut
Step 6 Secure the sealing nut to the plastic housing.
Figure 5-21 Connecting a sealing nut
Ensure that the sealing nut is secured.
Step 7 Route the FE1 cable through the cable hole on the left and the FE2 cable through
the cable hole on the right. Insert the plug into the FE port on the inverter and
tighten the coupling nut.
Issue 04 (2023-09-22)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
5 Connecting Cables
50
Advertisement
Table of Contents
