Table of Contents
Advertisement
SUN2000-(125KTL-M5, 200KTL-H4, 250KTL-H0,
286KTL-H0)
User Manual
Step 1 Remove the screws from the fan tray and store them properly. Pull out the fan
tray until the fan tray is flush with the inverter.
Figure 8-9 Pulling out a fan tray (1)
Step 2 Remove the cable ties shared by the cables, unscrew the connectors, and
disconnect the cables.
Figure 8-10 Disconnecting cables
Step 3 Pull out the fan.
Issue 04 (2023-09-22)
NO TE
If the fan gets stuck when being pulled or pushed, slightly lift it.
Copyright © Huawei Technologies Co., Ltd.
8 Maintenance
105
Advertisement
Table of Contents
