Honeywell SmartLine ST 800 User Manual page 3

This manual is a detailed how to reference for installing, piping, wiring, configuring, starting up,
operating, maintaining, calibrating, and servicing Honeywell's family of ST 800 SmartLine pressure
transmitters. Users who have a Honeywell ST 800 SmartLine pressure transmitter configured for
HART protocol or Honeywell's Digitally Enhanced (DE) are referred to the ST 800 Series HART/DE
Option User's Manual, document number 34-ST-25-38. Users who have a Honeywell ST 800
SmartLine pressure transmitter configured for Fieldbus operation are referred to the ST 800 Series
Fieldbus Option User's Manual, #34-ST-25-39.
The configuration of your Transmitter depends on the mode of operation and the options selected for
it with respect to operating controls, displays and mechanical installation. This manual provides
detailed procedures to assist first-time users, and it further includes keystroke summaries, where
appropriate, as quick reference or refreshers for experienced personnel.
To digitally integrate a Transmitter with one of the following systems:
•
For the Experion PKS, you will need to supplement the information in this document with the
data and procedures in the Experion Knowledge Builder.
•
For Honeywell's Total Plant Solutions (TPS), you will need to supplement the information in
this document with the data in the PM/APM SmartLine Transmitter Integration Manual,
which is supplied with the TDC 3000 book set. (TPS is the evolution of the TDC 3000).
ST 800 SmartLine Pressure Transmitters User's Manual, Document # 34-ST-25-35,
October 2012 – First Release
Rev. 1
January 2013 – Document # reference and meter body updates
Rev. 2
February 2013 – Parts list updates
Rev. 3
May 2013 – Updates to Parts list, Explosionproof Seal class, Fail Safe and Comms
Rev. 4
Module procedures.
July 2013 – Control Drawing updated to Rev. D
Rev. 5
Rev. 6 Feb 2014 - Advanced display updates. Approvals FISCO & GOST added. PILD, Dual
and Triple Calibration added.
May 2014 – PILD, Basic Display and High Pass Frequency updates
Rev. 7
July 2014 – PILD update referencing the option upgrade instructions
Rev. 8
December 2014 – MID and Marine approvals added
Rev. 9
July 2016 – DE added to voltage chart, approval updates and EU cert.
Rev. 10
September 2017 – Parts section updated
Rev. 11
Rev. 12 November 2018 - EU DECLARATION OF CONFORMITY and approvals updated,
voltage chart updated.
December 2020 – Enhancements added.
Rev. 13
March 2022 – Enhancements and standard display added, cleanup, and Part number
Rev. 14
updated.
October 2023 – Standard Display Menus Russian Language, MC Toolkit replaced
Rev. 15
with Honeywell Versatilis Configurator.
ST 800 Pressure Transmitter User's Manual
ii
About This Manual
Release Information:
Revision 15