Hisense HDW63314SS User's Operation Manual page 27

PROBLEM
The dishwasher won't
start
The dishwasher beeps
at the end of the cycle
The rinse aid light is on The rinse aid level is low.
The dishwasher runs
too long
The dishes are not
clean enough
The dishes are not
drying enough
POSSIBLE CAUSE
The door may not be closed
properly.
The power is off or not
connected.
The delay start option is
selected.
The child lock is activated.
This is normal and indicates
that the wash cycle is complete.
The dishwasher is connected to
a cold water supply.
The cycle time varies, depending
on the soil level of the dishes.
Depends on the option selected. Some options will add time to the cycle.
The water pressure is too low.
The inlet water temperature is
too low.
Dishes are too close together.
Improper use of detergent.
The selected cycle is not suitable
for the soil level on the dishes.
The spray arms are blocked.
The rinse aid dispenser is empty
or the setting is too low.
Dishes are loaded improperly.
The cycle you chose did not
include drying.
POSSIBLE SOLUTION
Make sure that the door is closed and latched.
Make sure that the power is connected and turned on.
Refer to the "Delay" section under "Controls and
indicators" on page 10.
Deactivate the child lock. Refer to the "Child lock"
section under "Functions" on page 10.
Add rinse aid.
Make sure that the dishwasher is connected to a hot
water supply. If not, change the water supply to a hot
water source.
When heavy soil is detected, the wash times will be
longer.
Make sure that the water pressure is above 20 psi.
Use your dishwasher when water demand is low.
Make sure that the dishwasher is connected to a hot
water supply. If not, change the water supply to a hot
water source. Use your dishwasher when hot water
demand is low.
Reload the dishwasher as shown in "Preparing and
loading dishes" on page 12.
Add detergent depending on the water hardness and
washing cycle you choose. Use fresh detergent.
Choose a different cycle with a longer washing time.
Make sure that the spray arms are not blocked and
are free to rotate.
Fill the rinse aid dispenser.
Increase the rinse aid setting.
Reload the dishwasher as shown in "Preparing and
loading dishes" on page 12.
Choose a cycle with drying.
27