Canon imageCLASS MF241d User Manual page 225

Hide thumbs Also See for imageCLASS MF241d:
Table of Contents

Advertisement

[Use SNMPv1]
Select the check box to enable SNMPv1. You can specify the rest of SNMPv1 settings only when this check box
is selected.
[Use Community Name 1]/[Use Community Name 2]
Select the check box to specify a community name. If you do not need to specify a community name, clear
the check box.
[Community Name]
Enter up to 32 alphanumeric characters for the name of the community.
[MIB Access Permission]
For each community, select [Read/Write] or [Read Only] for the access privileges to MIB objects.
[Read/Write]
[Read Only]
[Use Dedicated Community]
Dedicated Community is a preset community, intended exclusively for Administrators using Canon software.
Select the check box to use Dedicated Community. If you do not need to use Dedicated Community, clear the
check box.
6
Specify SNMPv3 settings.
If you do not need to change SNMPv3 settings, proceed to the next step.
Network (MF244dw / MF232w)
Permits both viewing and changing the values of MIB objects.
Permits only viewing the values of MIB objects.
219

Advertisement

Table of Contents
loading

This manual is also suitable for:

Imageclass mf232wImageclass mf244dw

Table of Contents