Sapido IPJC1n User Manual page 85

Internet Explorer Users:
◦ Click on Tools > Internet Options > Connections tab.
◦ Select never dial a connection, click on Apply button, and then click on
OK button.
◦ Click on Tools and then click on Internet Options.
◦ Click on Connections and then click on LAN Settings.
◦ Make sure none of the check boxes are selected and click on OK
button.
◦ Click on OK button.
Web page hangs, corrupt downloads, or nothing but junk characters is being
•
displayed on the screen. What do I need to do?
A:Force your NIC to 10Mbps or half duplex mode, and turn off the "Auto-
negotiate" feature of your NIC as a temporary measure. (Please look at the
Network Control Panel, in your Ethernet Adapter's Advanced Properties tab.)
Why can't I connect to the Web Configuration?
•
A:you can remove the proxy server settings in your web browser.
Why does IPJC1 's setup page shut down unexpectedly?
•
A:If one of the pages appears incompletely in IPJC1 's setup pages, please
click on Logout item on the Main Menu before shutting it down. Don't keep it
working. Then, close Internet browser and open it again for going back to the
previous page.
I don't know how to configure DHCP.
•
A:DHCP is commonly used in the large local network. It allows you to
manage and distribute IP addresses from 2 to 254 throughout your local
network via IPJC1 . Without DHCP, you would have to configure each
computer separately. It's very troublesome. Please Open Internet browser >
Input 192.168.1.1 in the website blank field > Select DHCP Server under the
IP Config Menu. For more information, please refer to Router Mode or AP
Mode).
How do I upgrade the firmware of IPJC1 ?
•
A:Periodically, a new Flash Code is available for IPJC1 on your product
supplier's website. Ideally, you should update IPJC1 's Flash Code using
Firmware Upgrade on the System Management menu of IPJC1 Settings.
Why is that I can ping to outside hosts, but cannot access Internet websites?
•
A:Check the DNS server settings on your PC. You should get the DNS
servers settings from your ISP. If your PC is running a DHCP client, remove
any DNS IP address setting. As the router assign the DNS settings to the
DHCP-client-enabled PC.
IPJC1 couldn't save the setting after click on Apply button?
•
A:IPJC1 will start to run after the setting finished applying, but the setting isn't
written into memory. Here we suggest if you want to make sure the setting